The fold-back electric cylinder motor is installed parallel to the electric cylinder, and is connected by a synchronous pulley in the middle; the linear electric cylinder motor is directly connected to the electric cylinder, that is, the electric cylinder and the motor are in the same straight line. Secondly, the overall length of the folded-back electric cylinder is shorter, and the length of the direct-connected electric cylinder is longer. The folded-back type saves more installation space than the direct-connected electric cylinder.
Note: The servo electric cylinder is lubricated by grease. It is recommended to add it regularly. Adding cycle: 3-6 months, using MobilithSHC220 grease, adding method: filling gun injection, adding position: nut and screw rod surface [Product Features]
1, can work in harsh environments, waterproof, explosion-proof, anti-salt fog and so on.
2. According to customer requirements, electric cylinders with different outputs, different speeds and different strokes can be customized.
3, using high-precision screw and brand-name motor, high positioning accuracy, fast response, adjustable stroke and speed.
4. This product has low noise, energy saving and environmental protection, and long working life.
5. This product is small in size, light in weight, easy to install and debug.
6. This product is equipped with various protection measures such as over-current and over-stroke to ensure the safe operation of the equipment.
[Main performance index]
1. Rated push-pull force: 0-200KN.
2. Action frequency (large): 15 times / second.
3. Rated stroke: 0-2000mm.
4. Working environment: high temperature resistance, dustproof, waterproof, explosion-proof.
5. Ambient temperature: -40 ℃ ～ 60 ℃.
6. Relative humidity: 80% (20 ± 5 ℃).
7. No pollution.
【The main technical parameters】
1. The output is between 0-200KN.
2. The speed is between 0-2000mm / s.
3. The stroke is between 0-3000mm.
1, fast acceleration, short positioning time, good dynamic performance! (Fine, accurate, fast, stable)
2.Precision and sturdy
3.Single axis can be used
4.Can be used for multi-axis combination
6.Simple structure can save mechanical design space
7, with a variety of installation and connection methods and accessories for design choice
8.Can be matched with various motors and motor control regulators
9.Multi-point positioning and multi-segment control
10. Selecting appropriate accessories can improve assembly efficiency
11.Meet different accuracy requirements in design
12. Save time and easy maintenance [Scope of use]
Aerospace test and testing, multi-degree-of-freedom simulation, multi-degree-of-freedom dynamic entertainment, multi-degree-of-freedom precision machining, robots, mechanical lifting platforms, automotive presses, automotive manufacturing equipment, mechanical automation production lines, steel continuous casting, petrochemicals, and material handling , Injection molding machine, mold control, valve control, precision machine tools, pharmaceutical machinery, food industry and other fields.
First, the use of electric cylinders:
1. The servo electric cylinder is a precision electromechanical integrated product. When using it, please read this precautionary note and the instruction manual of the relevant motor and driver in advance, and pay great attention during use. The electric cylinder must not be dismantled without the permission of the manufacturer, especially the screws outside the electric cylinder, otherwise the manufacturer will not be responsible.
2.The servo electric cylinder is a basic maintenance-free product, and the exchange of any parts and components must be performed at the production plant or the authorized place of the production plant, otherwise the production plant will not be responsible.
3. The motor and the servo electric cylinder are connected by a high-intensity synchronous belt and adjusted by tension. Therefore, you cannot disassemble the motor at will, otherwise the timing belt will be damaged due to improper tension.
4.During installation, do not apply external force torque on the piston rod to avoid damaging the electric cylinder.
5.The servo electric cylinder adopts grease lubrication method, and the cylinder body has a grease adding port. When adding Mobilith SHC220 grease and grease gun, the amount and period of addition are: 2 times (gun stroke) / 6 months ( Or 50 kilometers).
6. The method of refueling the screw nut is: after the electric cylinder is fully extended, stop the motor and cut off the power supply. Open the screw plug at the screw injection port on the cylinder barrel and use a special grease gun to refuel. After refueling, install a screw plug, turn on the power, and go for 2 to 3 round trips.
7.When the servo electric cylinder is debugged, it should be performed at a low speed first, and after all aspects are normal, increase the speed to avoid damage to the electric cylinder.
8. It is strictly forbidden to touch the sliding seat during product work and maintain a safe working range.
9. When the ball screw product is used vertically, it is recommended to install a brake device on the motor to prevent the item from falling. The gear belt drive is not recommended to use the vertical Z axis.
10. Resonance may occur when the effective stroke is too large, and the large speed should be relatively reduced when the stroke is larger.
Two electric cylinder maintenance instructions:
1. Lubrication is very necessary when using a servo electric cylinder. If there is no sufficient lubrication, frictional resistance will increase during operation and may become the main reason for shortening product life. Lubrication methods are roughly divided into manual lubrication and automatic forced lubrication You can make appropriate choices according to the system's operating speed, use environment, etc.
2. The frequency of lubrication and oil supply varies according to the use conditions and the environment. In general, it is recommended to replenish grease every 100 km.
3. When the electric cylinder works 24 hours a day for 2-3 months, you need to add grease once. If you hear abnormal sound during low and medium speed operation, you need to contact the manufacturer or send it to the manufacturer for inspection. In addition, if the piston rod is found damaged (bent, deformed, bumped), it needs to be returned to the factory for repair.
4. When the servo motor driver is used for a long time, pay attention to ventilation and heat dissipation to avoid burning.
Three after-sale instructions and suggestions
1. This product is guaranteed for one year under normal use (that is, non-artificial damage) from the date of shipment.
2. If the damage is caused by human factors or other abnormal use, the warranty is not covered.
3. This product is strictly forbidden to disassemble after leaving the factory. Once dismantled, it will not bear the warranty responsibility.
We will design the drawings first according to the customer's requirements, and sign the contract as soon as the customer's technical requirements are met. After signing the contract, we will charge a deposit of 30% -50% of the total amount, and the factory will place an order. Freight, the normal freight is borne by our company (normally there are logistics and ordinary express delivery, if the customer needs express or air freight, the customer will bear the extra costs)
After signing the contract and confirming the drawings, it takes about 2-5 weeks to produce.
- FXKT250 Folding Servo Electric Cylinder
- FXKT190 Folding Servo Electric Cylinder
- FXKT145 Folding Servo Electric Cylinder
- FXKT95 Folding Servo Electric Cylinder
- FXKT110 Folding Servo Electric Cylinder
- FXKT75 Folding Servo Electric Cylinder
- FXKT50 Folding Servo Electric Cylinder
- FXKT65 Folding Servo Electric Cylinder